When the threading machine is in operation, first place the pipe to be threaded into the pipe chuck, strike and clamp it tightly. Press the start switch, and the pipe will rotate along with the chuck. Adjust the size of the thread opening on the thread head and set the length of the thread opening. Then, turn the feed handwheel clockwise to make the die head of the die head press against the end of the rotating tube with a constant force. The die head will automatically cut the thread, and at the same time, the cooling system will automatically spray oil to cool the die head. When the thread edge is processed to the preset length, the die head will automatically open, and the thread edge processing is completed. Turn off the power, break open the chuck and remove the pipe.

The wire sleeve machine also has the pipe cutting function: put the pipe into the pipe chuck, hit the clamp, start the switch, put down the cutter frame on the feeding device, turn the feed hand wheel, make the blade on the cutter frame move to the length point that you want to cut, gradually rotate the handle on the cutter, make the blade squeeze the rotating pipe, and the pipe is squeezed off by the blade after 4 and 5 turns.